3D Printer Kits RAMPS 1.4 Mega2560 12864 LCD Controller A4988 for Arduino Reprap

Description

Store Categories
Store Categories
Step up / Down Power Module
Tester Detector
For 3D Printer
LCD LED OLED Display
Wireless Bluetooth Wifi Module
for Raspberry Pi
Module for Arduino
Module Kits
Amplifier Board
Other
3D Printer Kits RAMPS 1.4 Mega2560 12864 LCD Controller A4988 for Arduino Reprap
Detail
1.Mega 2560 control board CH340G version:
The Mega 2560 is an update for  Arduino Mega, which it replaces.
The board is a microcontroller board based on the ATmega2560-16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the for Arduino Duemilanove or Diecimila.
Product Summary:
CH340G replace the Atmega 8U2/16U2
CH340G Driver Download link, please copy the link and paste in browser: http://www.5v.ru/ch340g.htm
Microcontroller:ATmega2560
Clock Speed:16 MHz
EEPROM:4 KB
SRAM:8 KB
Flash Memory:256 KB of which 8 KB used by bootloader
Operating Voltage:5V
Input Voltage (recommended):7-12V
Analog Input Pins:16
Digital I/O Pins:54 (of which 14 provide PWM output)
DC Current for 3.3V Pin:50 mA
DC Current per I/O Pin:40 mA
2. Mega Pololu Shield Compatible (RAMPS 1.4 Shield)
It is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an for Arduino Mega with the powerful for Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
3.LCD 12864 with Controller
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
4. A4988 driver module
A4988 Stepper Motor Driver Board is  a breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)
* Maximum output current is 2A
* Simple step and direction control interface
* Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
* Adjustable current control lets you set the maximum current output with a potentiometer,which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates
* Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
* Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
* Short-to-ground and shorted-load protection
Package include:
1 x Ramps 1.4 board
1 x Mega 2560 R3 board, CH340G version
1 x 12864 LCD controller
5 x A4988 driver with heatsink
1 x USB cable
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
Payment Method
Returns Policy
Copyright © 2017 DataCaciques
hi, > 30 USD we offer Free Tracking Number for buyer .
HOME
PAYMENT
SHIPPING
ABOUT US
CONTACT US
Store Categories
Store Categories
Step up / Down Power Module
Tester Detector
For 3D Printer
LCD LED OLED Display
Wireless Bluetooth Wifi Module
for Raspberry Pi
Module for Arduino
Module Kits
Amplifier Board
Other
Detail
1.Mega 2560 control board CH340G version:
The Mega 2560 is an update for  Arduino Mega, which it replaces.
The board is a microcontroller board based on the ATmega2560-16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the for Arduino Duemilanove or Diecimila.
Product Summary:
CH340G replace the Atmega 8U2/16U2
CH340G Driver Download link, please copy the link and paste in browser: http://www.5v.ru/ch340g.htm
Microcontroller:ATmega2560
Clock Speed:16 MHz
EEPROM:4 KB
SRAM:8 KB
Flash Memory:256 KB of which 8 KB used by bootloader
Operating Voltage:5V
Input Voltage (recommended):7-12V
Analog Input Pins:16
Digital I/O Pins:54 (of which 14 provide PWM output)
DC Current for 3.3V Pin:50 mA
DC Current per I/O Pin:40 mA
2. Mega Pololu Shield Compatible (RAMPS 1.4 Shield)
It is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an for Arduino Mega with the powerful for Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
3.LCD 12864 with Controller
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
4. A4988 driver module
A4988 Stepper Motor Driver Board is  a breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)
* Maximum output current is 2A
* Simple step and direction control interface
* Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
* Adjustable current control lets you set the maximum current output with a potentiometer,which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates
* Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
* Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
* Short-to-ground and shorted-load protection
Package include:
1 x Ramps 1.4 board
1 x Mega 2560 R3 board, CH340G version
1 x 12864 LCD controller
5 x A4988 driver with heatsink
1 x USB cable
Payment Method
Feedback
Returns Policy
Payment Method
1.We accept
PayPal
only. But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
2.Payment must be received in 5 business days of auction closing.
3.Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
3.Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Feedback
1.We will offer the competitive price and the best quality ,and try to send out package as soon as possible .If you get the goods and you are satisfied ,pls leave us a
Positive
feedback .
2.If you have any problem or you need some help , pls do
NOT
leave any bad feedback , We will always try all we can do to help you solve the problem .
Returns Policy
1.All package need to
wait 30 days
(US only need 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
2.If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
3.If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
HOME
PAYMENT
SHIPPING
ABOUT US
CONTACT US
Copyright © 2017 DataCaciques
On Mar-14-19 at 18:52:10 PDT, seller added the following information: